Can the wax filling machine accommodate different sizes, heights, and shapes of candle jars?

Electromagnetic wax melting systems are more energy efficient than traditional electric heating systems especially for equipment above 300L capacity,and it can be heated to 150℃.

Performance comparison under 25℃ ambient workshop temperature using soy wax

500L electric heating wax melting tank

• Heating time to 100℃ approximately 4 to 5 hours
• Constant temperature power consumption approximately 8KW to 10KW per hour

500L electromagnetic heating wax melting tank

• Heating time to 100℃ approximately 2 to 3 hours
• Constant temperature power consumption approximately 5KW per hour

Compared with traditional electric heating systems electromagnetic heating can reduce heating time by approximately 40 percent to 50 percent while improving thermal efficiency and reducing heat loss

Main energy saving advantages include

• Electromagnetic induction direct heating technology
• Adjustable power frequency control
• Full insulation cotton covering tank body and bottom
• Faster temperature recovery speed
• Reduced heat transfer loss compared with water jacket heating

For candle factories producing aromatherapy candles reed diffuser products coconut wax candles soy wax candles or large batch glass jar candles electromagnetic heating systems can significantly improve production efficiency while reducing electricity costs

This technology is especially recommended for

• Continuous industrial candle manufacturing
• Fully automatic candle filling production lines
• Multi shift factory production
• Customers seeking lower labour cost lower energy consumption and stable wax temperature control

Yes our standard configuration is 220V 50Hz and we support customized industrial voltage systems including 110V 220V 380V 415V and 480V with both 50Hz and 60Hz frequency options for global export markets

For example

• North America commonly uses 110V 60Hz or 220V 60Hz
• Europe commonly uses 380V 50Hz
• Southeast Asia and Middle East factories commonly use 220V or 415V systems

Our engineering team can customize single phase or three phase electrical configurations according to different factory conditions production capacity and local industrial standards

For a 100L aromatherapy candles wax melting tank the standard power configuration is around 6KW while a 1000L industrial wax melting tank usually uses a 30KW three phase system

This customized voltage design helps overseas candle factories reduce installation difficulty improve equipment stability and lower labour cost during continuous production of aromatherapy candles reed diffuser products soy wax candles and container candles.

For the desktop double pump candle filling machine, the wax filling volume range per nozzle is 1g to 1000g.

Yes, we do offer semi-automatic machines for producing taper and pillar candles with specific diameters and heights.

Here are the key details:

• The machine operates with 2 molding cycles per hour, resulting in an hourly

output of 300–600 pieces (depending on candle size).

• Each machine is custom-built for one specific candle dimension (diameter + height).
• One operator can manage up to 8 machines simultaneously.

Yes, the stand-type wax melting tanks can maintain stable output for 24-hour continuous mass production during peak seasons.

You can select the suitable tank size according to your actual production output requirement.For long-time continuous heating, we recommend the electromagnetic heating type, which features faster heating speed and saves more electricity.

The tank is fitted with double temperature controllers for precise temperature control.Meanwhile, it is filled with thermal insulation cotton inside to effectively reduce heat loss, keep the wax temperature stable for a long time, and ensure consistent production performance during non-stop operation.